Front Suspension

Previous image | Back | Next image

I did a funny thing. See how the lower end of the shock tower is rusted through around the lower torsion tube? I should have just thrown this front beam assembly out, and gotten a rust free assembly. However, I decided I'd mess with this one, and report later on whether or not it breaks. So...I welded and brazed patches on both sides of both ends of both shock towers. What a total pain.

On the top tube you can see (from left to right) the torsion arm bearings: roller bearing, brass bushing, composition bushing.

Home Baja Bumper Air Filter Oil Pressure Sender Front Suspension
Heater Blower Gauges Distributor Starter Relay
Bug Door Door Vapor Barrier Heat Riser Weber Carburetor
Clock Wiper Motor Oil Pump and Filter Rear Spring Plates