Oil Pressure Sender

Previous image | Back | Next image

Clearly, I'll need a skid plate to protect the temp sender. Remember, I'm building a Baja here. Even on the street, something to protect the sender would be good. I though about just welding a little fin in front of the sender.

This worked just great, sort of. After everything was put together, I discovered that my temp gauge still hardly registered. I was guessing either the gauge or sender was bad, but I've replaced both.

Apparently my oil sump plate is not well grounded. In a few weeks (i.e. March 2001), I'll try this again, and carefully ground the oil sump plate.

Home Baja Bumper Air Filter Oil Pressure Sender Front Suspension
Heater Blower Gauges Distributor Starter Relay
Bug Door Door Vapor Barrier Heat Riser Weber Carburetor
Clock Wiper Motor Oil Pump and Filter Rear Spring Plates